LET'S TALK

Call

Need something? Feel free to ask us on

022-6918-1920

Our experts are happy to help anytime between 9 am to 7 pm

Please note that we are closed on Sundays and National holidays.

WhatsApp

Let's get this conversation started. Tell us your queries and we will get back to you soon.

Launch Chat

Watch Wave Ultima

Updated 

Watch Wave Ultima

Wave Ultima is here with the ultimate smartwatch experience brought to you by boAt. Experience unmatched visual clarity with a 1.8" inch Curve arc display that shines brightly under the sun. Packed withe every feature imaginable, control your device with a touch and make calls with single chip Bluetooth calling. With over 100+ sports modes and active modes, Wave Ultima has a mode for every mood and an excellent battery backup that will last you for days. Reach your ultimate potential with Wave Ultima.

​ ​

Specifications

Model

Wave Ultima

Screen Type

1.8"

Battery Capacity

300 mAh

Bluetooth Version

V5.0

Working Temperature

20 to 50 degree

Charging Time

About 2 Hours

Working Time

Up to 15 days

​​

Troubleshooting FAQs

  1. Attach the magnetic end of the charging cable which comes with the watch package on the charging pad of the watch which is located on the back of the watch and connect the other end which is an USB-A end to a 5V, 2A rated power adapter or power bank or a computer.

  2. The Watch Wave Ultima’s display would show the charging status and charging percentage while charging.

Note: If the Watch Wave Ultima is connected to a computer USB port for charging, the speed of charging would be less as the power pushed by the USB port of a computer is less than the 5V 2A rated power adapter.

  1. Check if the charging connector behind the watch is clean and rust free.

  2. Try cleaning it with an alchohol swab.

  3. If the problem still persists, kindly replace the product.

Battery charge status is shown on the watch homepage with the percentage of the charge remaining on the watch Wave Ultima’s battery. 

  1. Before using the Watch Wave Ultima for the first time, please fully charge the smartwatch first.

  2. Charging through wall adapter – Specs of the adapter: 5V, 2A

  3. Any other accessories could be used for charging the Watch Wave Ultima as long as the above norms are followed.

boAt Wave Ultima needs the boAt Wave app to be installed on the users’ media devices. It is available

on both Google Play Store and Apple App Store to be downloaded and installed into the users’ devices

to use and utilize the Wave Ultima full functionality-

Step 1: Via QR Code Scanning

  • Find the QR code on the product manual of the Watch Wave Ultima for installing the Wave App on the media devices of the users.

  • Open the QR Code Scanner app on the user’s devices and scan the code present on the user manual of the Watch Wave Ultima. Thereafter, follow the on-screen instructions to install the Wave app on the user’s device.

Step 2: Via searching the App on Google Play or Apple Play Store​

  • On Google Play or Apple App Store, in the search-bar, type ‘boAt Wave App’ and enter search.

  • You will see the boAt Wave app in the search result list.

  • Click on the install button to install boAt Wave app on the user’s media device.

Step 1:

After installing the boAt Wave app, turn the watch on and open the

Wave app on the user’s device. Click on the ‘Confirm’ on the Wave app to switch on the Bluetooth on the user’s device.

Step 2:

The previous process would enable the user to search for the Watch Wave Ultima to connect with the Wave app.

Step 3:

Once the Wave Ultima is found via Bluetooth, it will show on the

Wave app.

Click on the ‘Ultima’ Device and then click on the ‘Confirm Bind

Device’ button to start pairing Watch with the boAt Wave app.

Once the connection is successful all the fitness data stored on the

Watch will sync automatically on the Wave app.

1. Keep the boAt Wave app updated to the latest version

2. Close all the programs on the watch → Stop and restart Bluetooth and GPS → Connect again

3. Check and enable notification functions of your phone and keep the phone and watch in close contact.

Note: Make sure your phone system meets Android 7.0 and above and iOS 12.0 and above.

● Check to see if the Wave Ultima is within the 7 m distance from the connected media device or not and there are any obstructions in between or not. If this is the case then bring the watch within 10m distance and there are not any obstructions in between.

● If, still the Bluetooth is disconnecting, close the app, switch off and on the Bluetooth and start the app again to connect with the watch.

  1. Yes, step counting, heart rate monitoring, calorie count, spO2, BP, time can be recorded directly on your watch while your phone is not connected.

  2. Watch has some internal memory to record this data.

  3. Once you are in contact with your phone, you can sync the data to the app.

  1. Make sure call alert and message alert are enabled from the app.

  2. Sync the watch after enabling these features

  3. Even if the notifications are not coming, switch off your phone’s Bluetooth and again switch on OR restart your phone

  4. Try uninstalling and installing the boAt Wave app and then start binding process with the watch and check if the issue is still persisting or not.

  5. Reset the watch and check if the function is working or not.

Open the music player on your phone, select asong which you want to play, and control from music (play/pause/next/previous/volume up down)

Note 1: Make sure you enable music control from the app first.

Note 2: Make sure the watch is connected with the app.

  1. In order to sync the data to the boAt Wave app, connect the watch Wave Ultima to the media device via the Wave app and go to the app’s homepage, drag down the screen.
    This will start the syncing process and data will be synced to the app.

  2. Make sure you are in Bluetooth range and watch and Wave app are nearby when you are syncing the data.

  3. If the app is taking too long time to sync or it gets stuck while syncing, unbind the device with the app and reconnect again.

 Note: Try to sync the data of the app at least once in every 7 days to avoid huge data to be synced in a single go and to avoid any data loss.

  1. We have designed the watch so that the display is active on a slight flick of the wrist.

  2. The tracker may take a second or two to light up the screen.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid

  1. Make sure you have enabled auto brightness from the watch or the app.

  2. Auto brightness will only work according to time set on the app.

  1. Make sure you wear the watch while sleeping in order to track the sleep data.

  2. Sleep data is estimated by primarily movement. Once you are laid down, watch will take approximately an hour to assume that you have gone to sleep.

  1. Check if the user is having hairs, tattoo, skin complexion, scaring, wear the watch too lose or too tight might affect the readings.

  2. Check if the heart rate sensor which is there on the bottom of the watch is glowing in green or not. If the sensor is working properly the sensor should glow in green colour.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.​

Your watch is tracking the movement if your wrist so if you are doing something that requires a lot of hand movement then step count can be affected.

Blood pressure monitoring is only for the reference, data may not match with the medical equipment. This watch is not a medical grade equipment.

General FAQs

No. The watch does not have camera control feature

There are total 100 modes you can select from.

Your stress can be recorded according to the heart rate variability.

1-29 % relax; 30-59% normal; 60-79% medium; 80-99% high

The green lights are used to monitor your heart rate. There is an optical sensor that detects the passage of the blood and then estimates the heart rate based on that information. Red light is the blood oxygen sensor

Yes, step counting, Heart rate monitoring, calorie count and sports modes can be recorded directly on your watch while your phone is not connected

Watch has some internal memory to record this data. Once you are in contact with your phone, you can sync the data to the app.

No, you cannot change the intensity or the number of vibrations for any alert.

You have to enable automatic sports mode from app first. Automatic sports mode will automatically recognize if you are walking or running.

Note: this feature works only for walking and running. Watch will take up to 5 to 7 minutes to track your movement.

Long press on the home screen to select and change the watch face OR go to setting option, select ‘watch faces’ to change the watch face

  1. Long press the button located on the right side of the Watch, it would lead to turning the watch on

  2. Raise your wrist to wake up the screen of the watch

While the Wave Ultima is On, go to the setting option in the main menu and then tap on shut down shutdown option, this would lead to turning the watch off.

Short pressing the side button would lead to opening the menu

● While the user is inside the menu, tapping the several icons would lead

to entering the different modes on the Wave Ultima.

● There are following mode options on the menu of the Wave Ultima-

(i) Sport – For tracking the exercises done by the users.

(ii) Phone & BT Calling to access contacts, phone pad and history.

(iii) Heart Rate – For measuring the heart rate of the users.

(iv) Blood Oxygen – For Measuring the saturation level of oxygen (spO2) in the user’s blood

(v) Stress Monitor - To check stress levels of users and Relax Mode – For breathing exercise of the users

(vi) Alarm – To set up alarm for the users

(vi) Music Control – To control the music from the watch when the users are listening to music

(vi) Timer – To set up timer for the users when in need

(vii) Setting – To enter in to the settings of the watch

(viii) Sleep Monitor - To track sleep of users.

(ix) Ambient Sound - To detect noise pollution around users.

(x) Find my Phone - To ring the phone when the user is trying to locate their phone connected to the watch.

● There are many different exercises which can be tracked via Sports Mode.

(i) Run (ii) Walk (iii) Bike (iv) Dance (v) Hike (vi) Climbing (vii) Treadmill (viii)

Spinning (ix) Yoga (x) Pilates (xi) Swimming (xii) Core Training (xiii) Strength

Training and more!

● Select any one of the exercises before starting that particular exercise.

● Short press side button to start/pause that particular exercise

● To stop that particular exercise tracking session, short press the side button and select finish.

● Inside the menu, click on the ‘Heart Rate’ icon while wearing the watch on the wrist.

● Bring your wrist close to your heart. This will enable the watch to show the heart rate reading of the user on the watch’s screen.

● Inside the menu, click on the ‘Blood Oxygen’ icon while wearing the watch on the wrist.

● Bring your wrist close to your heart and try to hold the arm still. This will enable the watch to show the reading of the spO2 in the blood of the user on the watch’s screen

  1. Inside the menu, click on the ‘Guided Breathing’ icon while wearing the watch on the wrist.

  2. Choose your preferred time for breath in and breathe out and relax to undergo the breathing exercise.

● Inside the menu, click on the ‘Music Control’ icon on the watch to enter into the music control feature

● While listening to music, users can play, Pause, move back to the previous track, jump forward to the next track and control the volume of the music.

  1. Go to the Menu of the watch

  2. Inside the menu, select the ‘Setting’ option

  3. Inside the ‘Setting’ option, scroll down and select ‘Watch Faces’ option.

  4. Swipe to see all the available watch face option and select your preferred watch face. There are 7 face watches available to select.

Alternate Step: Long Press on the home screen to switch between the watch faces on the watch.

  1. Go to the Menu of the watch

  2. Inside the menu, select the ‘Setting’ option

  3. Inside the ‘Setting’ option, select ‘Brightness’ option.

  4. Brightness could be changed as per users required preference. There are three levels of brightness of the screen present in the Watch Wave Ultima.

Swipe left or right on the home screen to directly go to the activity tracking function to see the tracking data – Sleep, Calories Burned, Steps, Distance covered and Health Care Data

● Swipe up on the homepage would lead to shortcut menu

● There are four functions in the shortcut menu- (i) DND (ii) Raise wrist Gesture (iii) Brightness (iv) Find My Phone (v) Flashlight

  1. Swipe down on the home screen of the watch to review the notifications of the connected media device.

  2. Swipe up to the last page to delete all notifications

To use the BT Calling feature, open the boAt Wave app and pair the watch.

Once paired you will get the pop up on the app home screen to

connect with Phone’s Bluetooth.

Click on “pair” to connect with phone’s Bluetooth

Alternatively, you can go to phone’s Bluetooth settings and pair

“ULTIMA_BT” to start the calling feature on your watch

​The watch storm is of IP68 rating, which means it is dust, sweat and splash resistant for up to 1.5m for 10 minutes.