1. ​Check if the charging connector behind the watch is clean and rust free.

2. Try cleaning it with an alchohol swab.

3. If the problem still persists, kindly replace the product.

Battery charge status is shown on the watch homepage with the percentage of the charge remaining on the watch Wave Fury’s battery. 

1. Before using the Watch Wave Fury for the first time, please fully charge the smartwatch first.

2. Charging through wall adapter – Specs of the adapter: 5V, 2A

3. Any other accessories could be used for charging the Watch Wave Fury as long as the above norms are followed.

boAt Wave Fury needs the boAt Wearables app to be installed on the users’ media devices. It is

available on both Google Play Store (Android 7.0 and above) and Apple App Store ( iOS 12.0 and above)

to be downloaded and installed into the users’ devices to use and utilize the Wave Fury full

functionality-

1. Open the Wearables app after installation.

2. In the app, use the search bar to find the specific smartwatch model you want to connect.

3. Once you've located your smartwatch, select it within the app.

4. Review and agree to the privacy policy presented in the app.

5. Enable Bluetooth on your mobile phone.

6. Keep the smartwatch in close proximity to your phone.

7. The app will prompt you to connect the smartwatch with the app. Confirm the connection on both the app and the smartwatch.

Note: Enable all the notifications from the phone.

1. Keep the boAt Wearables app updated to the latest version

2. Close all the programs on the watch → Stop and restart Bluetooth and GPS → Connect again

3. Check and enable notification functions of your phone and keep the phone and watch in close contact.

Note: Make sure your phone system meets Android 7.0 and above and iOS 12.0 and above.

1. Check to see if the Wave Fury is within the 7 m distance from the connected media device or not and there are any obstructions in between or not.

2. Make sure there is no obstacle between the watch and the phone.

1. Yes, step counting, heart rate monitoring, calorie count, spO2, BP, time can be recorded directly on your watch while your phone is not connected.

2. Watch has some internal memory to record this data.

3. Once you are in contact with your phone, you can sync the data to the app.

1. Disable the battery optimization feature.

2. Make sure smart reminders (call alert and message alert are enabled ) on the app are On and synced to the watch. Also make sure your notification center of the phone is displaying messages. Only then will your smartwatch also display those notifications.

3. Even if the notifications are not coming, switch Off your phone’s Bluetooth and again switch On OR restart your phone

4. Try uninstalling and re-installing the boAt Crest app, allow all the permissions except for battery optimization & Auto-start and then start binding process with the watch and check if the issue is still persisting. Reset the watch and check if the function is working or not.

Open the music player on your phone, select a song which you want to play, and control from music (play/pause/next/previous/volume up down)

Note 1: Make sure you enable music control from the app first.

Note 2: Make sure the watch is connected with the app.

1. In order to sync the data to the boAt Wearables App, connect the Wave Fury to the media device via the Wearables app and go to the app’s homepage, drag down the screen. This will start the syncing process and data will be synced to the app.

2. Make sure you are in Bluetooth range and watch and Wearables app are nearby when you are syncing the data.

3. If the app is taking too long to sync or it gets stuck while syncing, unbind the device with the app and reconnect again.

   Note: Try to sync the data of the app at least once in every 7 days to avoid huge data to be synced in a single go and to avoid any data loss.

1. We have designed the watch so that the display is active on a slight flick of the wrist.

2. The tracker may take a second or two to light up the screen.

3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.

1. Make sure you wear the watch while sleeping in order to track the sleep data

2. Sleep data is estimated by primarily movement. Once you are laid down, the watch will take approximately an hour to assume that you have gone to sleep

3. Once you wake up, do sync the watch with the app to view sleep records

1. Check if the user is having hairs, tattoo, skin complexion, scaring, wear the watch too lose or too tight might affect the readings.

2. Check if the heart rate sensor which is there on the bottom of the watch is glowing in green or not. If the sensor is working properly the sensor should glow in green colour.

3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.​

• Blood pressure monitoring is only for the reference, data may not match with the medical equipment. This watch is not a medical grade equipment.

• Your watch is tracking the movement if your wrist so if you are doing something that requires a lot of hand movement then step count can be affected.

• Make sure your watch is connected to your phone through the app and not your phone’s Bluetooth feature itself.

• Ensure that your app and the watch are synchronized.

• There are 100+ sports modes on the watch.

1. The green lights are used to monitor your heart rate.

2. There is an optical sensor that detects the passage of the blood and then estimates the heart rate based on that information.

• Yes, step counting, heart rate monitoring, spO2, time can be recorded directly on your watch while your

phone is not connected.

1. Watch has some internal memory to record this data.

2. Once you are in contact with your phone, you can sync the data to the app..

• No, users cannot change the intensity or the number of vibrations for any alert.

• Make sure the screen is not scratched anywhere to avoid screen damage as most of the controls are performed via the touchscreen of the watch. As screens are a delicate part it should be handled with care. Users may apply screen protector on the touchscreen to avoid it from any scratches.

• Long press the side button of the Wave Fury, it would lead to turning the watch on

• Long press the button located on the side of the Wave Fury it would lead to turning the watch off

• Short press the side button

●While the user is inside the menu, tapping the several icons would lead to entering the different modes on Wave Fury

●There are following mode options on the menu of the Wave Fury

1. Sport – For tracking the exercises done by the users.

2. Dial to access contacts, phone pad and history.

3. Heart Rate – For measuring the heart rate of the users.

4. Blood Oxygen – For Measuring the saturation level of oxygen (spO2) in the user’s blood

5. Stress Monitor - To check stress levels of users and Relax Mode – For breathing exercise of the users

6. Alarm – To set up alarm for the users

7. Music Control – To control the music from the watch when the users are listening to music

8. Timer – To set up timer for the users when in need

9. Setting – To enter in to the settings of the watch.

10. Sleep Monitor - To track sleep of users.

11. Find my Phone - To ring the phone when the user is trying to locate their phone connected to the watch.

1. There are many different exercises which can be tracked via Sports Mode. Running, Treadmill, Walking, Cycling, Basketball, Badminton, Football, Yoga, Free Movement.

2. Select any one of the exercises before starting that particular exercise.

3. Press side button to pause/resume that particular exercise.

4. To stop that exercise tracking session, press the side button and tap on the X icon.

1. Inside the menu, click on the ‘Heart Rate’ icon while wearing the watch on the wrist.

2. Bring your wrist close to your heart. This will enable the watch to show the heart rate reading of the user on the watch’s screen.

1. Inside the menu, click on the ‘Blood Oxygen’ icon while wearing the watch on the wrist.

2. Try to hold the arm still. This will enable the watch to show the reading of the spO2 in the blood of the user on the watch’s screen

1. Inside the menu, click on the ‘Music Control’ icon on the watch to enter the music control feature.

2. While listening to music, users can play, Pause, move back to the previous track, jump forward to the next track, and control the volume of the music.

• Rotate the side button to change the watch face

1. Go to the Menu of the watch.

2. Inside the menu, select the ‘Setting’ option.

3. Inside the ‘Setting’ option, select the ‘Brightness’ option.

4. Brightness could be changed as per users required preference.

• Tap on Health Data to track activities like – Sleep, Calories Burned, Steps, Distance covered and Health Care Data

1. Swipe down on the homepage would lead to shortcut menu.

2. These are the functions in the shortcut menu- DND, Brightness, Timer, Camera, Flashlight and Settings

1. Swipe up on the home screen of the watch to review the notifications of the connected media device.

2. Swipe up to the last page to delete all notifications

1. Open the boAt Wearables app, pair the watch with the app first.

2. Once paired you will get the pop up on the app home screen to connect with Phone’s Bluetooth

3. Click on “pair” to connect with phone’s Bluetooth

4. Alternatively, you can go to phone’s Bluetooth settings and pair “WAVEFURYBT” to start the calling feature on your watch

• ​The watch is water-resistant. The water resistance only works if- (1) Maximum depth is 1.5 m; (2) Maximum time for exposure to water is 10 minutes

• ​The watch isn’t suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing and other wading or deep-water activities with high-speed water flow.