LET'S TALK

Call

Need something? Feel free to ask us on

022-6918-1920

Our experts are happy to help anytime between 9 am to 7 pm

Please note that we are closed on Sundays and National holidays.

WhatsApp

Let's get this conversation started. Tell us your queries and we will get back to you soon.

Launch Chat

Watch Wave Force

Updated 

Watch Wave Force

Military grade durability meets best-in-class wearable technology. Wave Force – our first rugged smart watch that’s built to outperform and outlast. It doesn’t just look tough but it’s packed with a zinc-alloy body and IP68 Dust, Sweat and Splash Resistance.

Specifications

Model

Wave Force

Screen Type

1.83" HD Display

Battery Capacity

410 mAh

Bluetooth Version

V 5.2

Working Temperature

0 to 40 degree

Charging Time

About 2 hours

Working Time

Up to 7 days

​​

Troubleshooting FAQs

  1. Attach the magnetic end of the charging cable which comes with the watch package on the charging pad of the watch which is located on the back of the watch and connect the other end which is an USB-A end to a 5V, 2A rated power adapter or power bank or a computer.

  2. The Watch Wave Force’s display would show the charging status and charging percentage while charging.

Note: If the Watch Wave Force is connected to a computer USB port for charging, the speed of charging would be less as the power pushed by the USB port of a computer is less than the 5V 2A rated power adapter.

  1. Check if the charging connector behind the watch is clean and rust free.

  2. Try cleaning it with an alchohol swab.

  3. If the problem still persists, kindly replace the product.

Battery charge status is shown on the watch homepage with the percentage of the charge remaining on the watch Wave Force’s battery. 

  1. Before using the Watch Wave Force for the first time, please fully charge the smartwatch first.

  2. Charging through wall adapter – Specs of the adapter: 5V, 2A

  3. Any other accessories could be used for charging the Watch Wave Force as long as the above norms are followed.

Wave Force needs boAt Crest app to be installed on the users’ media devices. It is available on

both Google Play Store and Apple App Store to be downloaded and installed into the users’ devices

to use and utilize the Wave Force full functionality-

Step 1: Via QR Code Scanning

  • Find the QR code on the product manual of the Wave

    Play for installing the boat Crest App on the media

    devices of the users.

  • Open the QR Code Scanner app on the user’s devices

    and scan the code present on the user manual of the

    Wave Force.

  • Thereafter, follow the on-screen instructions to install

    the boat crest app on the user’s device.

Step 2: Via searching the App on Google Play or Apple Play Store​

  • On Google Play or Apple App Store, in the search-bar,

    type ‘boAt Crest’ and enter search.

  • You will see the boat Crest app in the search result list.

  • Click on the install button to install boat crest app on

    the user’s media device.

Step 1: First, make sure that your phone version is either on Android 7.0 and

above or iOS 12 and above.

1: Download the boAt Crest application, from Play Store for Android

and AppStore for iOS.

2: When you open the app, please allow all permissions.

3: Register with your mobile number by accepting the terms and

conditions.

4: You will receive a verification code as an SMS. Enter theverification code in the app.

5: Follow the instructions on the App and you will find WAVE Force smartwatch in the available device list.

6: Click on the WAVEForce_XXXX to pair the Wave Force

Smartwatch with your phone.

7: This will complete the pairing process after which the WAVE Force Smartwatch will start syncing with the app.

Step 2: The previous process would enable the user to search for the Wave Force to connect with the crest app as it would enable the Bluetooth of the device.

Step 3:Open the app and click add device to start searching the nearby

device.

Click on watch to search Wave Force

Click on WAVEForce to pair the device. This will allow you to make or receive calls from the watch

Click on Yes on the watch to pair the device

BT pairing icon represents :

One side blue one side grey represents that you are only

connected with the app and not with phone’s BT. This will restrict

you to make or pick calls from the watch

Complete Blue icon represents full pairing i.e both BLE and BT are

connected and you can make or receive calls from the watchBT pairing icon represents :

One side blue one side grey represents that you are only

connected with the app and not with phone’s BT. This will restrict

you to make or pick calls from the watch

Complete Blue icon represents full pairing i.e both BLE and BT are

connected and you can make or receive calls from the watch

First, make sure that your phone version is either onAndroid 7.0 and above or iOS 12 and above. It is necessary to accept and agree to all the terms and permissions including the location services also.

1. Download the boAt Crest application, from Play Store for Android and AppStore for iOS.

2. When you open the app, please allow all permissions.

3. Register with your mobile number by accepting the terms and conditions.

4. You will receive a verification code as an SMS. Enterthe verification code in the app.

5. Follow the instructions on the App and you will find Wave Force

6. Smartwatch in the available device list. Click on the WAVEForce_XXXX pair the Wave Force Smartwatch with your phone.

7. This will complete the pairing process after which the Smartwatch will start syncing with the app.

  1. The operational distance for the Bluetooth is 7-10m. It is ideal that phone and watch is in direct contact with each other.

  2. If still the Bluetooth is disconnecting, close the app, switch off and on the Bluetooth and start the app again.

  3. Make sure the app is running in background always.

  1. Yes, step counting, Heart rate monitoring, calorie count and sports modes can be recorded directly on your watch while your phone is not connected

  2. Watch has some internal memory to record this data.

  3. Once you are in contact with your phone, you can sync the data to the app.

1. Make sure call alert and message alert are enabled

2. Sync the watch after enabling these features

3. Even if the notifications are not coming, switch off your phone’s Bluetooth and again switch on OR restart your phone

4. Try uninstalling and installing the boAt Crest and then start binding process with the watch and check if the issue is still persisting or not.

5. Reset the watch and check if the function is working or not.

Open the music player on your phone, select asong which you want to play, and control from music (play/pause/next/previous/volume up down)

Note 1: Make sure you enable music control from the app first.

Note 2: Make sure the watch is connected with the app.

  1. In order to sync the data to the boAt crest app, connect the Wave Force to the media device via the boat crest app and go to the app’s homepage,

    drag down the screen. This will start the syncing process and data will be synced to the app.

  2. Make sure you are in Bluetooth range and watch and ProGear app are nearby when you are syncing the data

  3. If the app is taking too long time to sync or it gets stuck while syncing, unbind the device with the app and reconnect again.

Note: Try to sync the data of the app at least once in every 7 days to avoid huge data to be synced in a single go and to avoid any data loss.

  1. We have designed the watch so that the display is active on a slight flick of the wrist.

  2. The tracker may take a second or two to light up the screen.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.

  1. Inside the menu click on the 'Music Control' icon on the watch to enter into the music control feature.

  2. While listening to music, users can play, pause, move back to the previous track, jump forward to the next track and control the volume of the music.

Note : This feature might not work for some of the music apps with different control protocols.

  1. Make sure you have enabled auto brightness from the watch or the app.

  2. Auto brightness will only work according to time set on the app.

  1. Measure your night sleep automatically.

  2. Sleep duration and classification details (Deep, light, REM,Awake)are available on the watch and the app.

  3. Sleep will not be recorded if you have sleep time less than 3 hours

  4. Sync the watch with the app in the morning to view sleep data

    Note: Data might not be recorded correctly if a lot of movement is noticed between 6-8 AM

  1. Check if the user is having hairs, tattoo, skin complexion, scaring, wearing the watch too lose or too tight might affect the readings.

  2. Check if the heart rate sensor which is there on the bottom of the watch is glowing in green or not. If the sensor is working properly the sensor should glow in green colour.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.​

Your watch is tracking the movement if your wrist so if you are doing something that requires a lot of hand movement then step count can be affected.

Blood pressure monitoring is only for the reference, data may not match with the medical equipment. This watch is not a medical grade equipment.

General FAQs

Yes. Wave Force does have a camera control feature.

There are 700+ Different Sports Types on App. 20 built-in

Your stress can be recorded according to the heart rate variability.

1-29 % relax; 30-59% normal; 60-79% medium; 80-99% high.

Yes, users can set individual goals for every sports mode

The green lights are used to monitor your heart rate. There is an optical sensor that detects the passage of the blood and then estimates the heart rate based on that information. Red light is the blood oxygen sensor.

Yes, step counting, Heart rate monitoring, calorie count and sports modes can be recorded directly on your watch while your phone is not connected

Watch has some internal memory to record this data. Once you are in contact with your phone, you can sync the data to the app.

Yes it can be changed in below mentioned modes.

1. None

2. Soft

3. Strong

Go to Wave Force features > watch Faces. Under the Watch faces option, select the watch face you want to set on your watch & click apply.

There are 4 default watch faces available on the watch.

Long press on the watch home screen to view default watch faces, select add your preferred watch face

Long press the button located on the right side of the Wave Force it

would lead to turning the watch on

Raise your wrist to wake up the screen of the watch

While the Wave Force is on, long press on the button shut down power off option, this would lead to turning the watch off.

Pressing the side button would lead to opening the menu

1. While the user is inside the menu, tapping the several icons would lead

to entering the different modes on the Wave Force/ Force.

2. There are following mode options on the menu of the Wave Force/

Force-

(i) Sport – For tracking the exercises done by the users.

(ii) Heart Rate – For measuring the heart rate of the users.

(iii) Blood Oxygen – For Measuring the saturation level of oxygen (spO2) in the user’s blood

(v) Guided Breathing Mode – For breathing exercise of the users

(vi) Alarm – To set up alarm for the users

(vii) Music Control – To control the music from the watch when the users

are listening to music

Note:- This feature might not work for some of the music apps with

different control protocols.

(vii) Timer – To set up timer for the users when in need

(viii) Settings – To enter in to the settings of the watch

1. There are multiple sports modes available in the watch Walking, treadmill, running,, badminton, football, basketball, Tennis, yoga, etc. You can access any out of these.

2. Select any one of the exercises before starting that exercise.

3. Short press side button and then click on start/pause to start/pause that exercise

From the watch home screen> Swipe right to reach the 'Heart Rate' icon >>Tap on Heart Rate >> Your HR measurement will get started, stay still while HR measurement is in progress and you can see the HR value on the screen.

1. You can measure it on the watch. A user can view the details on the app.

2. Swipe left from the watch home screen >> Go to SPO2 >> Tap measure.

3. Post your measurement, Please sync the SPO2 values to your boAt Crest app.

1. This feature will allow users to monitor and rate the quality of

breathing. Breath exercise (Inhale/Exhale pattern) on the

watch for selected duration and rhythm

2. It is a feature available on the watch where users can use it to

do breathing exercises.

  1. Inside the menu, click on the ‘Music Control’ icon on the watch to enter into the music control feature

  2. While listening to music users can play, Pause, move back to previous track, jump forward to next track and control the volume of the music.

Note:- This feature might not work for some of the music apps with different control protocols.

  1. Tap on 'More' on the home dashboard. Go to Wave Force features > watch Faces. Under the Watch faces option, select the watch face

    you want to set on your watch> click apply.

  2. There are 4 default watch faces available on the watch.

  3. Long press on the watch home screen to view default watch faces

  4. Add your preferred watch face.

  1. Go to the Menu of the watch

  2. Inside the menu, select the ‘Setting’ option

  3. Inside the ‘Setting’ option, select ‘Brightness’ option.

  4. Brightness could be changed as per users required preference. There are three levels of brightness of the screen present in the Watch Wave Force.

1. Swipe down on the home page would lead to shortcut menu

2. There are five functions in the shortcut menu- (i) Daily Activity (ii) Heart Rate Monitor (iii) stress monitor (iv) Sleep monitor

Short press the dial to reach to the menu.

  1. Swipe right on the home screen of the watch to review the notifications of the connected media device.

  2. Swipe up to the last page to delete all notifications

The water resistance level of the Wave Force smartwatch is IP68.