Skip to main content
LET'S TALK

Call

Need something? Feel free to ask us on

022-6918-1920

Our experts are happy to help anytime between 9 am to 7 pm

Please note that we are closed on Sundays and National holidays.

WhatsApp

Let's get this conversation started. Tell us your queries and we will get back to you soon.

Launch Chat

Party Pal 200

Updated 

2 months ago

​

Party Pal 200

​

Live it large and party like a star with Party Pal 200! With its 70W RMS Stereo, experience incredible, mind-blowing stereo sound that’ll shake your world. Light up the room with dynamic RGB LEDs that adjust on the go and keep the party going all night with 7 hours of playback! If that isn’t enough, double up with the TWS feature and a host of other connectivity options to choose from.

​

​

​

​

​

​

​

​

​

​

​ ​

​Specifications

​​​

Model

Party Pal 200

Speaker Type

Wireless Party Speakers

Bluetooth Version

V5.0

Water Resistance

NA

Music Playtime

7HRS

Transmission Range

10m

Driver Size

1.5” *2, 3.5” *2, 8” *1

Frequency

50Hz-20kHz

Battery Capacity

4000mAh

Rated Power

70W RMS

Charging Time

4hrs

Aux Connectivity

Yes

Bluetooth Profiles

A2DP/AVRCP

Troubleshooting FAQs

  1. Turn the speaker on. Short press the Mode button in case you need to select Bluetooth mode. Its LED indicator blinks blue until the pairing is done.

  2. Activate the phone’s Bluetooth function and search for “Party Pal 200”. As soon as the speaker gets selected and paired by you, the connection gets indicated by a sound prompt.

Note:

  • The speaker can automatically reconnect to the last paired device.

  • If you are having connection troubles, then remove Party Pal 200 from the list of paired devices on your phone, keep the phone closer to the speaker and try pairing again

  1. Check to see if the device is in pairing mode, after powering it on the LED indicator will blink blue.

  2. Check if the speaker is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.

  3. Check if the device being connected to supports Bluetooth connections or not

  4. Check if the speaker being connected to does have any software issues or not – Check to forget the device on Bluetooth, update the mobile software, if it still does not work try factory resetting the device.

  1. Check if restarting the speaker resolves the issue.

  2. Check if the same problem happens for different devices and media players.

  3. Check if there are any obstructions between the speaker and the device, move the device at a closer range to the speaker and see if it still affects it.

  4. Try factory-resetting the device.

  • To charge the speaker, plug one end of the USB Type C cable into the device and connect the other end to a computer or wall adapter

  1. Check if restarting the device resolves the issue.

  2. Check if the charging cable connected to the speaker is not broken, use other charging cables to charge the speaker and ensure that the charger being used is not of 9V or 12V as that will damage the speaker. The Red LED light located on the speaker would indicate if the charging is happening or not.

  3. Check if the Type C Charging port on the case is damaged or not

  4. Try factory-resetting the device.

  1. Low Battery: The LED indicator will turn into red to indicate whenever charging is required.

  2. Charging: Solid red LED indicates that the speaker is being charged. (Note: Speaker shouldn’t be turned on while charging)

  3. Fully Charged: Once the speaker gets fully charged, it is indicated by the LED going off

  1. Charging through wall adapter – Specs of the adapter: 5V, 2A

  2. Charging through cable/wire – Standard cable: 35 strands @0.10mm diameter/strand

  3. Any other accessory could be used for charging speaker if the above norms are followed.

  1. Check if connected device does not have any equalizer settings applied.

  2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.

  3. Check if the distortion or quality lowers at all volumes or only at high volumes.

  4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.

  5. Check if the problem occurs at all levels of charging or only at low charging levels.

  6. Check if the speaker does not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.

  1. Check if restarting the device resolves the issue.

  2. Fully let the speaker discharge and then charge it fully again before use.

  3. Check to see if the device has been properly connected, i.e. the jack is properly inserted into the device for aux, SD card is properly functioning for SD mode, properly paired for Bluetooth mode with light solid blue.

  4. Try connecting through a different connection mode or media device.

  5. Check if the device was not subject to any mishandling or exposed to direct sunlight or hazards like fire.

  1. Check to see if the device has been properly charged first or not. A red LED light on the speaker will indicate they are still being charged. This light will turn off once the speaker has been completely charged.

  2. Check if the voltage of the charger is correct for the speaker or not.

  3. Check by switching the speaker on manually, press and hold the power on button for at least 3 seconds.

  4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire

  1. Check if restarting the device resolves the issue and if the speaker is in Aux mode by short pressing the power button.

  2. Check if you have connected the aux cable properly and in the correct orientation on both ends.

  3. Check if the problem persists even after using a different cable or different device to connect to the speaker

  1. Check to see the microphone is not being blocked by any dust or obstruction.

  2. Check to see if the microphone is being held at the adequate distance

  3. for it to be able to pick up the voice.

  4. Check if the microphone was not exposed to any hazards like direct sunlight or fire.

  5. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.

  6. The microphone is not functional using the aux mode, check if the device is not in aux mode.

  7. Try factory-resetting the device

  1. Check if the controls do not work while connected to another device

  2. Check if the device is in aux mode because the buttons will not work in aux mode

  3. Check if the media player being used supports such controls and if the controls do not function on call or other media players

  4. Check if the controls have been physically damaged or exposed to any hazards

  1. Check if restarting the device resolves the issue and if the speaker is in SD/TF mode.

  2. Check if your SD/TF Card is functional and working on another media device.

  3. Make sure that your music files are in the MP3 format on the card.

General FAQs

  1. Power On : Utilize the Power switch to power on the device

  2. Power Off : Utilize the Power switch to power off the device

  1. Long press EQ button for 3 seconds and the display shows ‘SEL’

  2. Press Auto scan button and the display shows ‘----’ , indicating a successful reset

  • The Amazon Firestick will not connect to the Soundbar. The Sound Bar and the Amazon Firestick would connect separately to the TV.

  1. Switch to AUX mode could be done by using the AUX cable to connect the phone and the speaker, and then short pressing the Mode button to select AUX mode

  2. In the AUX mode, you can control the audio playback by short pressing the play/pause button

  • PartyPal 200 can be connected to another PartyPal 200 and both can be virtually forged into one speaker for a greater impact. For TWS connection:

  1. Turn on both the speakers, keep both of them under Bluetooth mode.

  2. Press and hold the TWS button on one of the two speakers for about 2 seconds until you hear a beep

  3. After releasing TWS button, it may take a few more seconds for the speakers to connect

  4. Activate the phone’s Bluetooth function and search for “PartyPal 200” to establish pairing

  1. Short press Mode button to switch to FM mode

  2. Long press Play/Pause button auto scan channels

  3. Short press the CH button to switch channel adjust mode

  4. Short press Previous/Next button to adjust channel

  5. Short press Play/Pause to mute/unmute the speaker

  • Short press the Mode button in steps to select modes (Bluetooth/USB/TF/FM/AUX)

  • Rotate the volume control to increase or decrease the volume.

  • Short press the Play/Pause button to play or pause the tracks

  1. Previous Track : Short press Previous Track button

  2. Next Track : Short press Next Track button

  1. Attach the microphone to the speaker

  2. Short press the MIC PRI button to prioritize the mic

  3. The mic echo can be adjusted via the ECHO control

  • To ensure maximum efficiency and battery life ensure that the speaker is not always used at 100% volume and that the battery is charged when it falls to 20% and below.

  • Yes, it does. It supports Bluetooth 5.0 and supports 3.5 mm aux in port playback in case you don’t want to stream wirelessly

  • The speaker has an aux port. USB, TF Card slots. Other than that, it supports Bluetooth connectivity (Version 5.0).

  1. The Speaker doesn’t support the handsfree calling feature.

  2. Mic is there but meant for karaoke

  • Yes, you can as it has Type C charging port.

  • Yes, the speaker is not powered through the aux cable so please make sure that it is charged and powered on before using it through aux connection

  • Yes, the speakerphone will work, and, in this case, the primary speaker will be the speakerphone

  • Yes, it can be. However, it is advised to only do so using an aux connection as Bluetooth mode might have latency issues.

  • Only 2 speakers of the same model can be connected in True Wireless Mode.

  • Yes, the speakerphone works in all modes except for aux.

  • The speaker does have IPX7 water protection, but it only protects under accidental exposure or submersion to water and is not meant for prolonged usage inside the water.

  • No, the speaker is not water proof.

Did you find it helpful?