LET'S TALK

Call

Need something? Feel free to ask us on

022-6918-1920

Our experts are happy to help anytime between 9 am to 7 pm

Please note that we are closed on Sundays and National holidays.

WhatsApp

Let's get this conversation started. Tell us your queries and we will get back to you soon.

Launch Chat

Rockerz 205 Pro

 Updated 

It’s time to up the game and switch to Rockerz 205 Pro wireless neckband that comes equipped with our low latency BEAST Mode, the perfect setup for your gaming and binge-watch sessions, with latency as low as 65ms. With the default ENx tech meant for environmental noise cancellation, you can be heard crystal clear across voice calls. Courtesy of our ASAP Charge tech, the earphones can fetch a total playtime of up to 12 hours in just 10 min of charging.

Walkthrough Video

Specifications

Headphone Type

In-Ear

IPX Rating

IPX5

Driver Size

10mm x 2 Drivers

Impedance

16 Ohms

Frequency Response

20Hz - 20KHz

Battery Capacity

200mAh

Playback Time

Up to 30 Hours

Talk Time

Up to 30 Hours

Dual Pairing

Yes

BEAST Mode Latency

Yes

ENx Tech (Activated by default)

Yes

Charging Time

About 50 Minutes

Charging Port

Type C

Bluetooth Range

10 M

Bluetooth Version

V5.0

Troubleshooting FAQs

Charging

Use a USB Type C charging cable to charge the earphone through either a laptop or an adaptor.

  1. Low Battery: When the remaining talk time is less than 10 minutes, there is a “Low Battery” prompt and the Red LED flashes quickly to indicate the same.

  2. Charging: Solid Red LED indicates that the earphone is being charged. (Note that the earphone cannot be turned ON while charging). 

  3. Fully charged: Solid Blue LED indicates the same.

  1. Check to see if the charging wire being used is working – check to use another charging wire or try using the wire on another device.

  2. Check if the voltage of the charger is correct for the device, use only 5V 2A chargers.

  3. Check if the charging is done till the red light turns completely blue.

  4. Check if the battery was not tampered with or exposed to any electrical damage.

  5. Check if the charging port is not clogged with dirt. If so, please clean it with a cotton swab.

  6. Please check if the adapter and charging cable support fast charging.

Poor Sound Quality

  1. Check if connected device does not have any equalizer settings applied.

  2. Check if the device has issues even after moving it closer to the connected device and removing any obstructions.

  3. Check if the distortion or quality lowers at all volumes or only at high volumes.

  4. Check using different media players and different devices and if the distortion happens on all devices or only on specific ones.

  5. Check to see if the earbuds have ear wax accumulated. If so, please clean it with cotton swab and alcohol, after doing so gently blow dry it from a distance.

  1. Check if connected device does not have any equalizer settings applied.

  2. Check using different media players and different devices and if the volume change happens on all devices or only on specific ones.

Please adjust the volume on your phone and earphones. Make sure there is no source of interference nearby and the smartphone is within range.


Bluetooth Connectivity

  1. When switched off, press and hold the multifunction button (MFB) for 3 seconds to switch the earphones on. The earphones will automatically enter in pairing mode with a prompt; the blue and red LEDs will flash alternatively to indicate the same.

  2. Open Bluetooth on your device and search for ‘Rockerz 205 Pro’ in the list of available devices.

  3. Choose ‘Rockerz 205 Pro’ from the list and if asked, enter the pairing password ‘0000’ / ‘1234’ to establish Bluetooth connectivity.

  4. Once successfully connected, the blue LED flashes twice in every 4 seconds to indicate the same.

Note: The neckband automatically turns off after 5 minutes if no connection is established within this time.

  1. Check to see if the device is in pairing mode – Hold the Multifunction button for 5 seconds until the red and blue LED light ON the device starts flashing alternately.

  2. Check if the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.

  3. Check if it works after clearing the pairing list on the device, Press and hold the volume "+" button and the volume "-" button for about 5 seconds in standby mode to clear paired list of devices.

  4. Check if the device being connected to supports Bluetooth connections.

  5. Check if it is a passcode issue and if so enter '0000' or '1234'.

  6. Check to see if the device being connected to does not have any software issues – Check to forget the device on Bluetooth, update the mobile software.

For connecting Rockerz 205 Pro to two devices simultaneously, first connect the earphones to one of the devices. Then switch OFF the earphones and the device both. Thereafter, connect the earphone to the second device and again switch ON the first device. The earphone will get connected to both the devices. If they don’t, connect the first device manually once again to activate dual pairing.

  1. Check to Pair the boAt Rockerz 205 Pro to first phone as per usual pairing procedure, then switch it off. Then switch on the earphone again and enter pairing mode, enable
    Bluetooth function in second phone, find earphone’s Pairing Name “boAt Rockerz 205 Pro" and pair to second phone per usual procedure. Switch off earphone one more time. Then simply switch ON earphone, without entering pairing mode (a short press until white light comes on). The earphone should automatically re-connect to the last connected phone (which is the second phone). Then find headset “boAt Rockerz 205 Pro" in first phone’s Bluetooth setting, select this to pair to first phone. Both phones should now be paired to the earphone.

  2. Check to try dual pairing with other devices to see if it works with them.

Please ensure that there are no objects between the earphones and your wireless device. Also, please ensure that there is no radio or Wi-Fi interference nearby.

Long press both the volume buttons for 5 seconds at the same time. The red and blue lights flash thrice simultaneously. This will clear all the paired devices history from the device.

Red and blue LEDs light up automatically and enter the pairing state after flashing thrice simultaneously.


Dysfunctional Voice Assistant

  1. Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.

  2. Please follow the steps carefully, long press for 2 seconds and release, this should allow Google Assistant or Siri to pop up on the media screen of the device. Though under some circumstance, this featuremay or may not work on some devices which may be restricted by default.

Other Functional Issues

  1. Check to see if the device has been properly charged first, till the red light turns blue.

  2. Check if the voltage of the charger is correct for the device, use only 5V 2A Chargers.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to
    direct sunlight or hazards like fire.

  1. Check if the controls do not work while connected to another device

  2. Check to forget the device and re-pair it.

  3. Check if the media player being used supports such controls.

  4. Check if the controls do not function on call or other media players

  5. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

Microphone Functionality

Yes, Rockerz 205 Pro earphones has a dedicated mic perfect for calls and recording.

  1. Check to see the microphone is not being blocked by any particles.

  2. Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.

  3. Check if the microphone was not exposed to any hazards like direct sunlight or fire.

  4. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.

 

General FAQs

Technology

ASAP Charge is boAt’s very own patented technology. It lets your device charge at an incredible charging speed (may vary under some circumstance) where 10 mins of charging can give up to 10 hours of playback time.

Single press the Beast Mode quick switch button to activate low latency BEAST Mode. To turn it off, single press the same.

ENx Tech algorithm cancels out the background noise so that you can hear a crystal clear sound via voice calls. One needs to activate ENx as the mic is equipped with the same and activated by default.  Rockerz 205 pro does support ENx Tech.

Yes. Rockerz 205 Pro supports ENx Technology.

Yes. Rockerz 205 Pro does feature low latency for all the entertainment needs. While gaming is still subjective though because it all depends on the media device too. It is okay for casual gaming, but not professional gaming.

This does not need any trigger for it to activate. Once connected with your device, the processors initiate internal run for low latency automatically.

Device Controls

Power ON:

  1. When switched off, press and hold the Multifunction button for 3 seconds. A beep prompt will confirm the same.

  2. The Red & Blue LED flashes to indicate the same.

Power OFF:

  1. In any mode, press and hold the Multifunction button for 5 seconds. A beep prompt will confirm the same.

  2. The Red & Blue LED flash for 1 second before the device turns OFF.

  1. Tap the volume (+) button in steps to increase the volume. A beep will indicate the maximum volume.

  2. Tap the volume (-) button in steps to decrease the volume. A beep will indicate the minimum volume.

Single tap on the multifunction button to play/pause music.

Tap the Multifunction button once when answering or ending a call to complete the action.

  1. Long press the (Volume +) button to skip forward to next track.

  2. Long press the (Volume -) button to go back to previous track.

Press and hold the Multifunction button for 2 seconds during an incoming call to reject the call. A beep will indicate this.

Triple tap the Multifunction button for redialling the last contacted number.

Long press the multifunction button for 2 seconds to activate Voice Assistant. (Make sure your phone’s Voice Assistant is enabled before use).

You can change tracks, adjust volume, take and reject calls, redial, and access voice assistant with the inline buttons. For further information, please refer to the user manual.

If the device is connected to multiple mobile phones and you are already taking a call on one of the devices when the second mobile phone begins to ring, press the MFB button to switch to the second call, placing the first one on hold. One can continuously switch between the two calls using the multifunction button.

Press & hold the multifunction button to transfer the call from the earphone to the phone or vice versa.


Device Charging

Yes, Rockerz 205 Pro supports ASAP Fast Charging Technology. One can get a full charge within 50 minutes.

Rockerz 205 Pro wireless earbuds offer battery backup of up to 20 hours (at 100% volume) on a single charge.

Yes, Rockerz 205 Pro earphones can be charged with a mobile charger.


Water/Dust Protection

Yes, Rockerz 205 Pro is IPX5 certified which means it can withstand up to low pressure water jet spray but it cannot withstand submerging it into the water. It is recommended not to use it during swimming sessions.