Rockerz 100 Wireless

 Updated 

It's time to fill up your senses with pure ethereal sound because the boAt 100 Wireless carries dynamic 10mm drivers. The boAt 100 bluetooth headsets are made to ensure that audio bliss accompanies you up to 30 hours at a time, powered by a 320mAh Rechargeable Lithium Battery. It comes with IPX 4 Sweat and Water Resistance.

Specifications

Headphone Type

In-Ear

IPX Rating

IPX4

Drivers

10mm

Impedance

16 Ohms

Sensitivity

-104dB ± 3DB

Frequency Response

100Hz - 100KHz

Battery Capacity

320mAh

Wireless Technology Type

Bluetooth

Playback Time

30 Hours

Power Source

3.7V/320mAh

Compatibility

iOS and Android Compatibility

Charging Time

2 Hours

Dual Pairing

Yes

Bluetooth Version

V5.0

Microphone

Yes

Troubleshooting FAQs

Charging

  1. Use the Micro USB cable to connect earphones to your computer or adaptor device made for USB charging. 

  2. A Red LED indicator will turn ON when the earphones are charging.

  3. The Red LED will turn OFF when the earphones are fully charged.

  1. Check to see if the charging wire being used is working – check to use another charging wire or try using the wire on another device.

  2. Check if the voltage of the charger is correct for the device, use only 5V 2A chargers.

  3. Check if the charging is done till the red light turns completely blue.

  4. Check if the battery was not tampered with or exposed to any electrical damage.

  5. Check if the charging port is not clogged with dirt. If so, please clean it with a cotton swab.

  6. Please check if the adapter and charging cable support fast charging.

Poor Sound Quality

  1. Check if connected device does not have any equalizer settings applied.

  2. Check if the device has issues even after moving it closer to the connected device and removing any obstructions.

  3. Check if the distortion or quality lowers at all volumes or only at high volumes.

  4. Check using different media players and different devices and if the distortion happens on all devices or only on specific ones.

  5. Check to see if the earbuds have ear wax accumulated. If so, please clean it with cotton swab and alcohol, after doing so gently blow dry it from a distance.

  1. Check if connected device does not have any equalizer settings applied.

  2. Check using different media players and different devices and if the volume change happens on all devices or only on specific ones.

Bluetooth Connectivity

  1. Press & hold the Power button to switch the speakers ON.

  2. There will be a prompt as well as the rapid blinking of the mentioned LED indicator light. 

  3. Turn ON the Bluetooth function of your device and search for “Rockerz 100" in the list of available devices. 

  4. Choose “Rockerz 100” from the list and if asked then enter the pairing password ‘0000’ to establish Bluetooth connectivity.

  5. After successful pairing, the speaker is now ready to play music from your device.

  6. The speaker will automatically get connected to this device when switched ON if it is in range and the Bluetooth mode is ON.

  1. Check to see if the device is in pairing mode – Hold the Multifunction button for 5 seconds until the red and blue LED light ON the device starts flashing alternately.

  2. Check if the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.

  3. Check if it works after clearing the pairing list on the device, Press and hold the volume "+" button and the volume "-" button for about 5 seconds in standby mode to clear paired list of devices.

  4. Check if the device being connected to supports Bluetooth connections.

  5. Check if it is a passcode issue and if so enter '0000' or '1234'.

  6. Check to see if the device being connected to does not have any software issues – Check to forget the device on Bluetooth, update the mobile software.

For connecting boAt 100 Wireless to two devices simultaneously, first connect the earphones to one of the devices. Then switch OFF the earphones and the device both. Thereafter, connect the earphone to the second device and again switch ON the first device. The earphone will get connected to both the devices. If they don’t, connect the first device manually once again to activate dual pairing.

  1. Check to Pair the boAt Rockerz 100 to first phone as per usual pairing procedure, then switch it off. Then switch on the earphone again and enter pairing mode, enable
    Bluetooth function in second phone, find earphone’s Pairing Name “boAt Rockerz 100" and pair to second phone per usual procedure. Switch off earphone one more time. Then simply switch ON earphone, without entering pairing mode (a short press until white light comes on). The earphone should automatically re-connect to the last connected phone (which is the second phone). Then find headset “boAt Rockerz 100" in first phone’s Bluetooth setting, select this to pair to first phone. Both phones should now be paired to the earphone.

  2. Check to try dual pairing with other devices to see if it works with them.

Dysfunctional Voice Assistant

  1. Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.

  2. Please follow the steps carefully, long press for 2 seconds and release, this should allow Google Assistant or Siri to pop up on the media screen of the device. Though under some circumstance, this featuremay or may not work on some devices which may be restricted by default.

Other Functional Issues

  1. Check to see if the device has been properly charged first, till the red light turns blue.

  2. Check if the voltage of the charger is correct for the device, use only 5V 2A Chargers.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to
    direct sunlight or hazards like fire.

  1. Check if the controls do not work while connected to another device

  2. Check to forget the device and re-pair it.

  3. Check if the media player being used supports such controls.

  4. Check if the controls do not function on call or other media players

  5. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

Microphone Functionality

Yes, Rockerz 100 earphones has a dedicated mic perfect for calls and recording.

  1. Check to see the microphone is not being blocked by any particles.

  2. Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.

  3. Check if the microphone was not exposed to any hazards like direct sunlight or fire.

  4. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.

 

General FAQs

Technology

No. Rockerz 100 does not support aptX.

No. Rockerz 100 does not support low latency.

No. Rockerz 100 does not have cVc.

Device Controls

Power ON: Press & hold the Multifunction button for 3 seconds.

Power OFF: Press & hold the Multifunction button for 3 seconds.

  1. Short press the (+) button to increase volume.

  2. Short press the (-) button to increase volume.

Press the multifunction button to play/pause music.

  1. To answer an incoming call short press the centre multifunction button.

  2. To end call, press the centre multifunction button for about 1 second.

  1. Long press the (Volume +) button to skip forward to next track.

  2. Long press the (Volume -) button to go back to previous track.

Long press the multifunction button for 2 seconds to activate Voice Assistant. (Make sure your phone’s Voice Assistant is enabled before use).

Device Charging

Rockerz 100 takes 2H to fully charge. It does not support fast charging.

Yes, Rockerz 100 wireless earphones can be charged with a mobile charger.


Water/Dust Protection

Yes, Rockerz 100 Wireless earphones have IPX4 splash resistance making it perfect for sports and adventures.