1. Ensure the comb is installed until “click” sound.

2. Adjust the comb knob (1–6 mm / 7–12 mm / Body comb) properly.

3. Do not change the length during trimming.

1. Reattach the comb firmly until secure click.

2. Avoid any excessive pressure during use.

3. Inspect the comb teeth for damage.

1. Ensure the trimmer is OFF before installation.

2. Align head properly with slot.

3. Attach until it snaps into place magnetically.

4. Do not twist during installation.

1. Slight warmth during usage is normal.

2. Do not press the blade teeth against skin.

3. Allow the device to cool between long sessions.

1. Fully charge the trimmer before use (up to 120 minutes).

2. Disconnect the adapter before operating.

3. Avoid partial charging cycles repeatedly.

1. Ensure device is charged.

2. Check charging and power status on display.

3. Restart device after charging.

1. Ensure Type-C cable is firmly connected.

2. Use recommended 5V ⎓ 1A adapter.

3. Try alternate cable/adapter.

4. Ensure charging port is dry and clean.

5. Check digit al display for charging indication

1. Use only 5V ⎓ 1A adapter.

2. Avoid laptop USB ports.

3. Do not use while charging.

4. Ensure stable power source.

Power On:

1. Slide the Power Button upward.

2. White LED glows during operation.

Power Off:

1. Slide the Power Button downward after use.

2. The LED turns OFF.

1. With the comb attached, rotate the comb adjustment knob to set the desired trimming length of 0–11 mm.

2. Turn gradually and confirm the selected length before use.

3. For consistent results, avoid changing the knob setting while trimming.

• The Slazer S100 is designed for both face and body grooming, offering a smooth and precise trimming experience. Its stainless steel blades provide up to 0.5 mm precision trimming for clean and accurate styling.

1. Use a cleaning brush to remove hair.

2. Blade head and comb may be rinsed with water; dry immediately.

1. Apply 2–3 drops of light trimmer oil on the blade teeth.

2. Run the trimmer for 10 seconds to distribute oil evenly.

3. Now wipe the excess oil.

• Before storing the device, ensure that both the trimmer and the charging port are completely dry to maintain safe and optimal performance.

1. Align the comb with the cutting head. Slide the comb gently into place until it sits firmly and you hear a “click” sound, indicating that the comb is securely attached.

2. Ensure the comb does not wobble before trimming.

1. Align the blade assembly correctly with the mounting slot and push it in the indicated direction until you hear a “click” sound.

2. The click confirms that the blade head is securely locked in place.

3. Ensure it is properly fixed before use.

Note: Do not attempt to remove or install the blade while the device is powered ON.

1. Ensure the blade is aligned evenly on both sides before pressing into place.

2. Ensure hands are dry before handling the blade assembly.

1. Hold the trimmer body firmly.

2. Press the comb disassemble button and lift/pull the comb away from the cutting head to detach it.

3. Store the comb safely to avoid bending the teeth.

1. Hold the trimmer body firmly and gently push the blade head outward in the indicated direction to detach it from the unit.

2. Carefully lift it away from the unit.

3. Do not force removal.

1. Fully charge the trimmer before initial use.

2. Use a 5V ⎓ 1A USB power adapter.

3. Connect the Type-C cable to the trimmer and plug the USB end into a suitable power source.

4. LED glows Red during charging.

Note: Ensure the charging port is completely dry before connecting the adapter.

1. Once fully charged, the LED glows White continuously.

2. Disconnect charger after full charge.

3. It takes up to 180 minutes for full charge.

4. Do not charge continuously for extended periods after full charge

1. Charge the trimmer fully before first use.

2. Use a 5V ⎓ 1A USB power adapter.

Note: Unplug the adapter when the trimmer is in us