Skip to main content
LET'S TALK

Call

Need something? Feel free to ask us on

022-6918-1920

Our experts are happy to help anytime between 9 am to 7 pm

Please note that we are closed on Sundays and National holidays.

WhatsApp

Let's get this conversation started. Tell us your queries and we will get back to you soon.

Launch Chat
Ask a question

BassHeads 102

Updated 

5 months ago

​

​BassHeads 102

​

​It is time to get hooked into the clear, sassy sound of BassHeads 102. A carefully crafted half in-ear design with casual elegance in abundance, choose your colour that sets your vibe and begin the journey!.

​

​

​

​Specifications​

​​

Headphone Type

In-Ear

Super Extra Bass

Yes

Impendance

18 ohms

Driver Size

8mm

Sensitivity

104 ± 3dB

Frequency Response

20Hz – 20KHz

Noise Isolation

Passive

Microphone

Yes

Rate power

3mW

Compatibility

All 3.5mm Jack Devices

Troubleshooting FAQs

​​

  1. Check to see the microphone is not being blocked.

  2. Check to see if the microphone is being held at the adequate distance

  3. for it to be able to pick up the voice.

  4. Check if the microphone was not exposed to any hazards like direct sunlight or fire.

  5. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.

  6. Check if the mic hole is not clogged with dirt of sweat. If so, use cotton swab or toothpick to clean out the port holes or a dryer to dry out any water that maybe collected

  1. Check to see if the device has been properly connected, i.e., the jack is properly inserted into the device

  2. Check if there is any loose wiring.

  3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

  1. Check if the controls do not work while connected to another device.

  2. Check if the media player being used supports such controls and if they controls do not function on call or other media players.

  3. Check if the controls have been physically damaged or exposed to any hazards.

  4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.

  1. Check if connected device does not have any equalizer settings applied.

  2. Check if the distortion or quality lowers at all volumes or only at high volumes.

  3. Check to Check different media players and different devices and if the distortion happens on all devices or only on specific ones.

Check if connected device does not have any equalizer settings applied.

Check to Check different media players and different devices and if the volume change happens on all devices or only on specific ones.

No, it is not water resistant and water proof so it is advisable that you do not submerge the product inside water to avoid any mishap.

General FAQs

​

Yes, BassHeads 102 comes with passive noise cancellation.

Single click on the MFB button would result in answering an incoming call.

Once done talking, single click on the MFB button on the mic unit of the earphone once, would result in ending the call.

Press and hold the MFB button for 2 secs on the mic unit of the earphone would result in rejecting incoming calls

While playing music, single press on the MFB on the mic unit of the earphone would result in pausing the music

While on pause, Single press on the MFB on the mic unit of the earphone would result in playing the music again.

While playing music, double pressing the MFB button results in skipping to the next track.

While playing music, triple pressing the MFB button results in going back to the previous track.

Did you find it helpful?