• After installing the app, follow the steps shown on the app to set up your account by entering your phone number, name, and email ID. Account setup is a one-time action.

1. Turn on the Bluetooth on your media device.

2. Log in to your account on the boAt Hearables app.

3. Go to the “My Devices” section.

4. Open the case lid and take out Airdopes Supreme. The earbuds will show up under the list of available devices with “Ready to Pair'' status.

5. Tap the Airdopes Supreme name card and accept the pairing request pop-up notification on your media device.

6. Tap the ‘Pair’ option on the pairing notification. You can also save AD Supreme to your Google account for fast pairing in the future by clicking on “Save” and then “Set up”.

Congratulations! Airdopes Supreme is now connected to your media device with “Connected” status.

​

1. To reset Airdopes Supreme from your device, go to the Troubleshooting section “?” on the Hearables app.

2. Next, tap the “Malfunctioning” sub-header in the Troubleshooting section.

3. Click on the option “Reset My Device” to reset the earbuds.

Congratulations! Your Airdopes Supreme has been reset. Airdopes Supreme will now show as “Ready to Pair” in the My Devices section.

Follow the pairing procedure to connect the earbuds to your device.

To diagnose issues related to Bluetooth connectivity, mic, speaker, and battery, use the Smart Diagnostics function of the Hearables app.

1. Tap the “Diagnose My Device” option at the bottom.

2. Follow the instructions to start the smart diagnostics process.

3. Click on “Let’s Go” to start.

4. Complete all the steps one by one to check Bluetooth connectivity, mic, speaker, and battery functions.

5. Click on ‘Done’ to finish diagnostics

• You can view the product Smart Guide under the “System” tab of the Hearables app. Go to the ‘User Manual’ section and tap ‘Know More’ to access the Smart Guide.

1. Check if the device is in pairing mode, indicated by alternating LED flashes on both the earbuds.

2. Ensure that the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.

3. Clear all your pairing history and perform a fresh connection attempt.

4. If it is a passcode issue then enter 0000 / 1234.

5. Try to forget the earbuds from the device’s Bluetooth paired list, update the mobile software and if it still does not work, try factory resetting the product.

In the App :

• Check whether the Smart Diagnostics function of the boAt Hearables app can identify issues related to Bluetooth connectivity.

1. Check to see if the earbuds are in pairing mode indicated by alternate red and blue LED flashes on the master earbud and blue LED flashes on the slave earbud.

2. Check whether the boAt Hearables app on the media device is updated to the latest version. The app version can be checked from the Google Play Store for Android smartphones and from the App Store for iOS smartphones.

3. Check whether the case lid is open, and the earbuds have been taken out.

4. Ensure that the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.

5. Check to see if the media device being connected to supports Bluetooth connections.

6. Check if the Bluetooth of the media device is turned ON.

7. Check to see if the device being connected to has no software issues.

8. Check whether closing the app and opening it again solves the issue.

9. Try to forget the earbuds from the device’s Bluetooth paired list, update the mobile software and if it still does not work, try factory resetting the product.

1. Check when both the earbuds are taken out of the charging case. The earbuds will enter Connection Mode indicated by alternating red and blue LED flashes.

2. Place the earbuds in the charging case and then try using them again. Check if it connects automatically.

3. Check and see if factory resetting the device works.

• Check if restarting the device resolves the issue.

• Check if there are any obstructions between the earbuds and the device and clear them, move the device at a closer range to the earbuds and see if it still affects it.

• Resetting your airdopes usually resolves this issue.

​

To perform a reset on your Airdopes Supreme :

Note: Before performing a reset, go to settings and forget the device from your phone/laptop

1. Place the earbuds inside the case

2. While earbuds are inside, long press the Reset button located at the bottom of the charging case for 10 seconds

3. The case LED flashes for 5 times after successful factory reset meanwhile the Red LEDs on the earbuds also flash.

Factory reset through the App :

1. To reset Airdopes Supreme from your device, go to the Troubleshooting section “?” on the Hearables app.

2. Next, tap the “Malfunctioning” sub-header in the Troubleshooting section.

3. Click on the option “Reset My Device” to reset the earbuds.

Congratulations! Your Airdopes Supreme has been reset. Airdopes Supreme will now show as “Ready to Pair” in the My Devices section.

Follow the pairing procedure to connect the earbuds to your device.

1. The boAt Hearables app shows all currently and previously paired devices in the ‘My Devices’ section.

2. Once Airdopes Supreme is paired to your smartphone, the status gets changed to “Connected” in the thumbnail.

3. Tap the thumbnail, to check whether both the left and right earbuds are connected or not. You can also check the battery level of both the earbuds

1. To charge the earbuds, put them into the charging case in their correct orientation and close the case lid.

2. The Cyan LED on the case flashes for 5 seconds to indicate the left earbud charging from the case.

3. Purple LED on the case flashes for 5 seconds to indicate the right earbud charging from the case.

4. Blue LED on the case flashes for 5 times to indicate both earbuds charging from the case.

5. Once charging is completed, blue LED flashes for 5 seconds and the charging case automatically switches off to save power.

In the App :

• Check whether the Smart Diagnostics function of the boAt Hearables app can identify any earbud battery issues.

• To charge the case, plug one end of the cable into the case and connect the other end to a computer or a wall adapter or a power bank.

1. Check to see if the wire connected to the case is not broken. Use other wires and ensure that the charger being used is not of 9V or 12V as that will damage the case.

2. The LED located on the charging case indicates the battery status of the case.

3. To charge the case, plug one end of the provided cable into the case and connect the other end to a computer or a wall adapter. Note: The LED indicator located on the charging case indicates the battery status of the case. Case LED flashing slowly (red, white, or green light blinks continuously depending on the case battery level) indicates charging, and solid green LED in charging state indicates full charge.

4. Case battery level LED indication in charging state :

• <30% - Red LED blinks 3 times on opening the lid to indicate the battery level and then blinks slowly

• 30- 70% - White LED blinks 3 times on opening the lid to indicate the battery level and then blinks slowly

• >70% - Green LED blinks 3 times on opening the lid to indicate the battery level and then blinks slowly

1. Ensure the Airdopes case is charged for charging the earbuds.

2. Check to see if the earbuds have been put inside the case in the right orientation. Once the earbuds have been completely charged, the case LED flashes blue for 5 seconds.

3. Clean the magnetic charging pins on the case and on the earbuds with a clean cloth dipped in mild alcohol, apply a medium pressure while cleaning and check the charging of the earbuds again.

4. After cleaning, put both the earbuds into the case in desired orientation and close the lid.

​

In the App :

• Check whether the Smart Diagnostics function of the boAt Hearables app can identify any earbud battery issues.

1. Charging through wall adapter – Specs of the adapter: 5V, 2A

2. Charging through cable/wire – Standard cable: 35 strands @0.10mm diameter/strand

3. Any other accessory can be used for charging the earbuds if the above norms are followed.

Note : Before using the earbuds for the first time, it is recommended to fully charge the earbuds as well as the charging case. Also, keep the lid of the charging case closed while charging.

1. Go to the sound settings of your phone and set the equalizer to normal/ default/ zero/ none.

2. Perform a factory reset.

3. In case the earbuds have water droplets, use the blow dryer to dry out any water from a distance.

4. If the earbuds are clogged with ear wax, simply clear the earbuds to restore the original sound.

5. If your device still does not get fixed then perform a factory reset

​

In the App :

1. Check if ‘Spatial Audio’ is turned OFF in the boAt Hearables app.

2. Check if there are speaker issues using the Smart Diagnostics function of the boAt Hearables app.

1. Check to see if the device has been properly charged first. The blue LED on the earbuds rapidly flashes 5 times to indicate that they have been completely charged.

2. Check to see if in-ear detection has been turned off on the boAt Hearables app and try inserting the earbuds in the ears again.

3. Check if the voltage of the charger is correct for the charging case and if the lights on the bottom are glowing to indicate the charge level.

4. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire

1. Check if the controls do not work while being connected to another device.

2. Check if the media player being used supports such controls and if the controls do not function on call or with other media players.

3. Check if the controls have been physically damaged or exposed to any hazards.

1. Check if restarting the device resolves the issue.

2. Try factory resetting the device

3. Ensure that the connected device is within the Bluetooth range (10m) and there is no obstruction between the airdopes and the connected device

4. If sweat or water has gone inside the microphone then try to clean it with a cotton swab dipped in mild alchohol.

In the App :

• Check if there are issues with the earbud mic by using the Smart Diagnostics function of the boAt Hearables app.

1. Check if your Airdopes model has IWP™ tech integrated.

2. Make sure that you have paired the earbuds at least once before to the device you are trying to use IWP™ with.

3. Check if Bluetooth is turned on for your media device and if it has Airdopes Supreme in the list of paired devices.

4. Try factory resetting the device.

To perform a reset on your Airdopes Supreme:

NOTE: Before performing reset, clear "Airdopes Supreme" from the pairing device history by forgetting the device.

1. Place the earbuds inside the case and close the lid.

2. While the earbuds are inside the case, long press the reset button on the case for 10 seconds. After successful factory reset, the red LED rapidly blinks 5 times on both the case and the earbuds.

3. Re-open the case lid after 5 seconds.

4. Take out the earbuds from the charging case and perform a fresh connection.

Congratulations! Your Airdopes Supreme has been reset.

​

Factory reset through the App :

1. To reset Airdopes Supreme from your device, go to the Troubleshooting section “?” on the Hearables app.

2. Next, tap the “Malfunctioning” sub-header in the Troubleshooting section.

3. Click on the option “Reset My Device” to reset the earbuds.

Congratulations! Your Airdopes Supreme has been reset. Airdopes Supreme will now show as “Ready to Pair” in the My Devices section.

Follow the pairing procedure to connect the earbuds to your device.

• Single tap the CTC on either earbud to answer an incoming call

• Double tap the CTC on either earbud to end an ongoing call or reject incoming calls

• While playing music, single tap on the left or right earbud CTC to pause or play the track

1. While playing music, double tap on the left earbud’s CTC to return to the previous track.

2. While playing music, double tap on the right earbud’s CTC to skip to the next track

• Volume can only be adjusted via phone/media devices

1. Please note that both the earbuds can be used in Mono mode. Use Smart Power On for switching on the desired earbud.

2. The selected earbud will automatically enter the connection mode indicated by alternate red and blue LED flashes.

3. Turn on the Bluetooth on your phone/media device and search for “Airdopes Supreme” to connect.

1. Switch the earbuds on; both the earbuds automatically enter into Connection Mode.

2. This is indicated by the red and blue LEDs flashing alternatively on the master earbud and the blue LED flashing every 5 seconds on the slave earbud.

3. Turn on the Bluetooth functionality on your phone/media device and scan.

4. Search for ‘Airdopes Supreme’ and tap on the same for pairing & connecting via Bluetooth.

5. To switch to Stereo mode from Mono, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.

6. You can only skip to the "next track" using the right earbud in Mono/Stereo mode.

7. You can only switch to the "previous track" using the left earbud in Mono/Stereo mode.

1. In-ear detection is enabled by default on Airdopes Supreme.

2. You can use the boAt Hearables app to turn off or re-activate in-ear detection for your earbuds.

1. Low battery (<30%) : Red light quickly blinks 3 times every 30 seconds

2. Power On : Blue LED flashes for 1 second on opening the case lid

3. Power Off : Red LED flashes for 1 second

4. Pairing Mode : Alternate blue and red LED flashes on the master earbud ; Slave earbud LED flashes blue every 5 seconds

5. Pairing successful (1 time indication) : Solid blue LED flashes for 3 seconds

6. If pairing not successful (In pairing mode) : The earbuds will show solid red light for 1 second and auto power off

7. Connected : Blue light flashes on both the earbuds ; No LED flash when media is playing

8. Disconnected : Solid red LED flashes for 1 second and the earbuds power off automatically

9. Earbuds Charging : Alternate blue and red LED flashes on the master earbud ; Slave earbud LED flashes blue every 5 seconds

10. Fully Charged : Blue LED rapidly flashes 5 times on both the earbuds

11. Playing Music : All lights are OFF (But "Connected" status will remain)

• On Charging :

1. Cyan LED flashes for 5 seconds to indicate the left earbud charging from the case

2. Purple LED flashes for 5 seconds to indicate the right earbud charging from the case

3. Blue LED flashes for 5 times to indicate both earbuds charging from the case

• Fully Charged (100%) :

1. Blue LED flashes for 5 seconds once both the earbuds are fully charged

1. Our IWP™ technology allows the earbuds to connect to your phone if they have already been paired before instantaneously upon opening the case.

2. Simply open the case and ensure that the Bluetooth is turned on for your media device, the buds will connect as soon as the case is opened without the need to take them out of the case first!

• There is no special process to enable IWP™- simply follow the steps to first pair your Airdopes Supreme to your media device. Then upon subsequent usage, the IWP™ tech will be enabled and the earbuds will pair automatically to your previously paired media device if Bluetooth is turned on in your media device.

• Yes

• Yes

• Airdopes Supreme does support 65 ms low latency for entertainment and casual gaming. But if you’re looking for professional gaming equipment, then Airdopes Supreme is not the right product

• No

• No

1. No, the earbuds do not have any integrated volume controls on them. The volume has to be controlled using your connected Bluetooth device.

2. Ensure that in the Bluetooth settings of your media device, you have enabled syncing of Bluetooth and phone volume levels otherwise you may not be able to fully control the volume of the earbuds as intended.

• No

• No, the voice prompts are integrated inside the earbuds and there is no provision to turn them off or lower their volume.

• While your earbuds do have IPX4 water and sweat resistance, it is recommended that they are not submerged inside water directly or used for prolonged periods inside water like for swimming/showers, as it may lead to damage.