Type C to L 27W Cable

Ensure the cable is properly connected to both the PC and the Apple device.

Try a different USB-C port on the laptop.

Restart the device and check if it appears in Finder/iTunes/Explorer.

Inspect the device’s Lightning port for dust or debris.

Ensure the connector is inserted fully until it clicks

Check if the braided jacket is torn or if internal wires are exposed.

Inspect for burnt marks at the connector ends.

Confirm that the adapter supports 27W PD or higher.

Check if the Apple device supports PD fast charging (iPhone 8 or above).

Test using another PD-compatible adapter.

Perform a gentle flex-test near both connector ends.

Check if the Lightning connector is loose in the device’s port.

Test with multiple devices and adapters.

Check for any physical cuts, bent connectors, or frayed areas.

Verify if within warranty period (1 year).

Plug the Lightning connector into an iPhone/iPad/iPod or compatible Apple accessory.

The connector must click firmly in place.

When connected with a PD-enabled adapter and a PD-supported Apple device (iPhone 8 or later), fast charging activates automatically.

The device battery icon should confirm charging without interruptions.

The cable also supports non-PD charging when used with regular USB-C adapters or older Apple devices.

Charging speed may vary by adapter and device capability.

Connect the cable between the device and a computer.

The Apple device should appear in Finder/iTunes/Explorer.

Test file transfer to verify stable 480Mbps data sync.