Skip to main content
LET'S TALK

Call

Need something? Feel free to ask us on

022-6918-1920

Our experts are happy to help anytime between 9 am to 7 pm

Please note that we are closed on Sundays and National holidays.

WhatsApp

Let's get this conversation started. Tell us your queries and we will get back to you soon.

Launch Chat

Aavante Bar Orion

Updated 

5 months ago

​

Aavante Bar Orion

​

Listen to the big theatre-like sound at home with the Made in India Aavante Bar Orion. Its powerful 160W RMS will thump the enthralling boAt Signature Sound & envelope your room with entertainment. Equipped with 2.1 Channel and a wired subwoofer, Aavante Bar Orion will give you a cinema-like home experience.

​

​

​

​

​

​

​

​ ​

​Specifications

​​​

Model

Aavante Bar Orion

Technology

Optical, HDMI(ARC), Bluetooth v5.3, AUX, USB

Drivers

2.25” *4 SB + 6.5inch SW

Audio Output Power

160W R.M.S.

Frequency Response

40Hz-20KHz

Signal-to-Noise Ratio

≥ 70dB

Impedance

4Ω*4+4Ω

BT Transmission Range

Up to 10m

Dimensions

Soundbar: L900xH79xD90mm

Subwoofer: W190*H370 *D310 mm

​​

Remote Functions

Troubleshooting FAQs

  • Short press the “INPUT” button on Sound Bar or remote controller to switch it to BT mode. On your phone search for “Aavante Bar Orion” and connect.

  • Press Input to enter AUX/USB/Bluetooth/Optical/HDMI(ARC) selection Mode

  • For USB it will Play directly upon connection of a USB drive.

​

  1. Check if connected device does not have any equalizer settings applied.

  2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.

  3. Check if the distortion or quality lowers at all volumes or only at high volumes.

  4. Check for different media players and different devices and if the distortion happens on all devices or only on specific ones.

  5. Check if the problem occurs when connected to different power sockets.

  1. Check to see if the device has been properly connected, i.e. the jack is properly inserted into the device for aux, properly connected with the HDMI cable from unit's HDMI (ARC) slot to the HDMI (ARC) slot on your ARC compatible TV, check if the protective cap of the OPTICAL socket is removed, then connect an OPTICAL cable to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit, the USB that is connected is functional or if it is connected by Bluetooth then it is paired properly and the blue light is not blinking to indicate it is properly paired in Bluetooth mode.

  2. When using either of the Digital inputs, if there is no audio, try setting the TV output to PCM or connect directly to your Blu-ray/other source, some TVs do not pass-through digital audio, check the TV manual for details.

  3. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.

  4. Check if the device has been properly connected to the power socket and if the problem occurs on all modes of playback. If connected to the TV, ensure that the connections are secure, the TV supports the playback mode, and the volume is set properly on the TV.

  5. Check if the device was not subject to any mishandling or exposed to direct sunlight or hazards like fire.

​

  1. Check if the controls do not work while connected to another device

  2. Check if the device is in aux mode because the remote buttons will not work in aux mode

  3. Check if the media player being used supports such controls and if they controls do not function on call or other media players

  4. Check if the remote control has been physically damaged or exposed to any hazards

  5. Before you press any playback control button, first select the correct source.

  6. Reduce the distance between the remote control and the unit.

  7. Insert the battery with its polarities (+/-) aligned as indicated.

  8. Check that the batteries in the remote are functional and of the correct type, try to replace the battery.

  9. Aim the remote control directly at the sensor on the front of the unit.

​

  1. Check if the AAVANTE Bar Orion and the subwoofer are plugged in properly to the power source and turned on using the button on the soundbar or the remote.

  2. Check if there are any loose wirings.

  3. Turn off the power switch and wait for a few minutes and try again.

  1. Check if the controls do not work while connected to another device

  2. Check if the device is in aux mode because the buttons will not work in aux mode

  3. Check if the media player being used supports such controls and if they controls do not function on call or other media players

  4. Check if the controls have been physically damaged or exposed to any hazards

General FAQs

  1. Plug in the Power cable of the soundbar to an external power socket; the unit goes into the standby mode.

  2. Short Press the Power Button on the remote or soundbar control panel to turn on the soundbar

  • The Amazon Firestick will not connect to the Soundbar. The Sound Bar and the Amazon Firestick would connect separately to the TV.

  1. The unit will automatically turn to standby mode when no audio input is received for 30 Min. The Soundbar will wake up from Standby mode when any button is pressed, or source input is received.

  2. If the TV or the external unit is disconnected, switch it off.

  3. To switch the unit off completely, remove the main plug from the mains socket.

  4. Please turn the unit off completely to save energy when not in use.

  • Press the “ ” button repeatedly on the Soundbar or press the INPUT button on the remote control to select the BT, AUX, OPTICAL, HDMI ARC & USB Mode.

  • EQ Modes : The soundbar has four Equalizer modes

  1. EQ 1 – Music

  2. EQ 2 – Movie

  3. EQ 3 – News

  4. EQ 4 – 3D Mode

  • Press the Input button on the remote control to enter Bluetooth Mode. Turn on the Bluetooth functionality on your media device, search for “Aavante Bar Orion” and select the same to establish the pairing.

  • Use the provided 3.5mm AUX cable to connect external audio sources to the soundbar. Press the input button on the remote control to select AUX Mode.

  1. Insert your USB drive into the USB port on the soundbar. The soundbar goes automatically under USB mode.

  2. You can also press the input button on the remote control to switch to USB mode.

  1. Use an Optical cable to connect the soundbar to your optical device.

  2. Press the input button on the remote control to select the OPT mode.

  1. Use an HDMI cable to connect the soundbar to your HDMI(ARC) enabled device.

  2. Press the input button on the remote control to select the HDMI(ARC) mode.

  • No, it doesn't have in-built FM.

  • No, it doesn't support Alexa.

  • No, it does not support Dolby Audio Technology.

  • Yes, it does use HDMI (Arc)/ Optical/ Aux.

  • No, it can be use with Sound bars only.

  • It works on devices with Bluetooth or AUX connectivity.

  • Yes, it is mountable.

  • Yes

  • No. The installation is not provided by the seller.

Did you find it helpful?