• Press Input to enter AUX/USB/Bluetooth selection Mode

• For USB it will Play directly upon connection of a USB drive.

1. Check if connected device does not have any equalizer settings applied.

2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.

3. Check if the distortion or quality lowers at all volumes or only at high volumes.

4. Check for different media players and different devices and if the distortion happens on all devices or only on specific ones.

5. Check if the problem occurs when connected to different power sockets.

1. Check to see if the device has been properly connected, i.e. the jack is properly inserted into the device for aux, the USB that is connected is functional or if it is connected by Bluetooth then it is paired properly and the blue light is not blinking to indicate it is properly paired in Bluetooth mode.

2. When using either of the Digital inputs, if there is no audio, try setting the TV output to PCM or connect directly to your Blu-ray/other source, some TVs do not pass-through digital audio, check the TV manual for details.

3. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.

4. Check if the device has been properly connected to the power socket and if the problem occurs on all modes of playback. If connected to the TV, ensure that the connections are secure, the TV supports the playback mode, and the volume is set properly on the TV.

5. Check if the device was not subject to any mishandling or exposed to direct sunlight or hazards like fire.

1. Check if the AAVANTE Bar 590 and the subwoofer are plugged in properly to the power source and turned on using the button on the soundbar or the remote.

2. Check if there are any loose wirings.

3. Turn off the power switch and wait for a few minutes and try again.

1. Check if the controls do not work while connected to another device

2. Check if the device is in aux mode because the buttons will not work in aux mode

3. Check if the media player being used supports such controls and if they controls do not function on call or other media players

4. Check if the controls have been physically damaged or exposed to any hazards

• The Amazon Firestick will not connect to the Soundbar. The Sound Bar and the Amazon Firestick would connect separately to the TV.

1. Turn the Soundbar On (By default, Bluetooth mode gets switched on).

2. Activate your media device’s Bluetooth functionality and Search for the “Aavante Bar 590”. As soon as it gets selected by you and paired, music can be played wirelessly.

Note: The soundbar can automatically reconnect to the last paired device whenever switched on in BT mode.

• Switch On the soundbar and switch to the desire mode.

• Connect the respective mode (AUX/USB) and start the playback.

• Press the “ Mode button” to change the mode’s.

1. BT Mode

2. USB Mode

3. Aux Mode

1. Turn the soundbar On and switch to the desire mode.

2. Connect the respective mode (AUX/USB) and start the playback.

1. Charging: RED LED

2. BT: Blue LED

3. USB: Purple LED

4. AUX: RED LED

• During charging the red LED gets lit, whereas once the charge gets complete it gets indicated by the LED getting turned Off.

• No, it doesn't have in-built FM.

• No, it doesn't support Alexa.

• No, it does not support Dolby Audio Technology.

• Yes, it does use Aux.

• No, it can be use with Sound bars only.

• It works on devices with Bluetooth or AUX connectivity.

• No, it is not mountable.

• No

• No. The installation is not provided by the seller.