1. Check to see if the wire connected to the case is not broken.

2. Use other wires and ensure that the charger being used is not of 9V or 12V as that will damage the case.

3. To charge the case, plug one end of the provided USB Type-C cable into the case and connect the other end to a computer, power bank, wall adapter, etc..

Note: The LED on the charging case indicates the battery status of the case – during charging the red LED gets lit, whereas once the charge gets complete it get indicated by the LED getting turned Off.

1. Check if the connected device does not have any equalizer settings applied.

2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.

3. Check if the distortion or quality lowers at all volumes or only at high volumes.

4. Check for different media players and different devices and if the distortion happens on all devices or only on specific ones.

5. Check if the problem occurs when connected to different power sockets.

1. Check to see if the device has been properly connected, i.e. the jack is properly inserted into the device for AUX.

2. Check if the USB that is connected is functional.

3. Check if it is connected by Bluetooth then it is paired properly and the blue light is not blinking to indicate it is properly paired.

4. When using either of the Digital inputs, if there is no audio, try setting the TV output to PCM or connect directly to your Blu-ray/other source, some TVs do not pass-through digital audio.

5. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE.

6. Check if the device has been properly connected to the power socket and if the problem occurs on all modes of playback.

7. Check if the device was not subject to any mishandling or exposed to direct sunlight or hazards like fire.

1. Check if the Aavante Bar 485 and the subwoofer are plugged in properly to the power source.

2. Check if the devices are turned on using the button on the soundbar or the remote.

3. Check if there are any loose wirings.

4. Turn off the power switch and wait for a few minutes and try again.

1. Check if the controls do not work while connected to another device.

2. Check if the device is in AUX mode because the buttons will not work in AUX mode.

3. Check if the media player being used supports such controls and if the controls do not function on call or other media players.

4. Check if the controls have been physically damaged or exposed to any hazards.

• Press Input to enter AUX/USB/Bluetooth Mode/TF Mode.

1. During charging the red LED gets lit.

2. Once the charge gets complete it is indicated by the LED getting turned Off.

• To Reset the Bluetooth History Long Press Play/Pause Button for 3 Seconds.

• For USB it will Play directly upon connection of a USB drive.

• To Reset the Bluetooth History Long Press Play/Pause Button for 3 Seconds.

• Toggle Right to power on the device.

1. Turn the soundbar on. (By default, Bluetooth mode gets switched on).

2. Activate your media device's Bluetooth functionality and search “Aavante Bar 485”.

3. Once selected and paired, music can be played wirelessly.

Note: The soundbar can automatically reconnect to the last paired device whenever switched on in the BT mode.

1. Single press Play/Pause button to answer & hang up the call.

2. Short press the Play/Pause button to search channels automatically in FM mode.

1. Under Bluetooth mode, single press Play/Pause button to answer & hang up the call.

2. Long press Play/Pause button to reject the call.

• Press the “Mode button” to change the modes.

1. Turn on the soundbar and switch it to the desired mode.

2. Connect it with the respective mode (USB) and start the playback.

1. Turn on the soundbar and switch it to the desired mode.

2. Connect it with the respective mode (AUX) and start the playback.

• Yes, it does have an in-built FM.

• No, it doesn't support Alexa.

1. The Amazon Firestick will not connect to the soundbar.

2. The soundbar and the Amazon Firestick will connect separately to the TV.

• No, it does not support Dolby Audio technology.

• No, it can be use with Sound bars only

• No, installation is not provided by the seller.

• Yes, it does use AUX.

• It does work on other devices with Bluetooth or AUX connectivity.

• No, it is not mountable.

• No, it does not.