1. Check to see if the device has been properly connected, i.e. the jack is properly inserted into the device for AUX.

2. Check if the USB that is connected is functional.

3. Check if it is connected by Bluetooth then it is paired properly and the blue light is not blinking to indicate it is properly paired.

4. When using either of the Digital inputs, if there is no audio, try setting the TV output to PCM or connect directly to your Blu-ray/other source, some TVs do not pass-through digital audio.

5. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE.

6. Check if the device has been properly connected to the power socket and if the problem occurs on all modes of playback.

7. Check if the device was not subject to any mishandling or exposed to direct sunlight or hazards like fire.

1. Check if the Aavante Bar 480 and the subwoofer are plugged in properly to the power source.

2. Check if the devices are turned on using the button on the soundbar or the remote.

3. Check if there are any loose wirings.

4. Turn off the power switch and wait for a few minutes and try again.

1. Check if the controls do not work while connected to another device.

2. Check if the device is in AUX mode because the buttons will not work in AUX mode.

3. Check if the media player being used supports such controls and if the controls do not function on call or other media players.

4. Check if the controls have been physically damaged or exposed to any hazards.

1. Turn on the Sound Bar.

2. Search for “Aavante Bar 480” and connect.

• While charging the red LED gets lit, whereas once the charge gets complete it get indicated by the LED getting turned Off.

• Press Input to enter AUX/USB/Bluetooth Mode/TF Mode.

• To Reset the Bluetooth History Long Press Play/Pause Button for 3 Seconds.

1. The default mode will be Bluetooth mode.

2. The device will immediately go into pairing mode.

3. Once paired successfully, the LED will be solid blue.

• In BT/USB and AUX mode, short press the "▶||" button to play/pause the sound.

1. Turn the soundbar on. (By default, Bluetooth mode gets switched on).

2. Activate your media device's Bluetooth functionality and search “Aavante Bar 480” and as soon as it gets selected by you and paired, music can be played wirelessly.

3. Under Bluetooth mode, single press Play/Pause button to answer & hang up the call.

4. Long press Play/Pause button to reject the call.

5. To Reset the Bluetooth History Long Press Play/Pause Button for 3 Second.

Note: The soundbar can automatically reconnect to the last paired device whenever switched on in the BT mode.

1. Short press the '-' button in steps to reduce the master volume.

2. Short press the Volume '+' button in steps to increase the master volume.

1. Previous Track: Long press Volume Decrease '-' button to go back to the previous track.

2. Next Track: Long press Volume Increase '+' button to skip to the next track.

• Short press the Mode (MFB) Button to turn to BT/USB/Aux mode/FM.

1. Turn on the soundbar and switch it to the desired mode.

2. Connect it with the respective mode (AUX/USB/FM) and start the playback.

3. For USB it will Play directly upon connection of a USB drive.

1. Turn on the soundbar and switch it to the desired mode.

2. Connect it with the respective mode (AUX/USB/FM) and start the playback.

1. Insert the charging cable or aux cable into the slot for an external antenna to enhance the signal.

2. Press the "M" button to enter the FM mode.

3. Press the "Play/Pause" button to search channels automatically.

• Yes, it does have an in-built FM.

• No, it doesn't support Alexa.

1. The Amazon Firestick will not connect to the soundbar.

2. The soundbar and the Amazon Firestick will connect separately to the TV.

• No, it does not support Dolby Audio technology.

• No, it can be use with Sound bars only

• No, installation is not provided by the seller.

• Yes, it does using the Aux connectivity.

• It does work on other devices with Bluetooth or AUX connectivity.

• No, it is not mountable.

• No, it does not.